Game Error Fortnite

Fortnite Revive Action Picks Up Teammate Instead - PC Fix Guide

📅 Published: 2026-02-06 🔄 Updated: 2026-02-06 👥 Reports: 2 ⚡ Severity: 🟢 Low

🎯 Quick Answer

Clear the game's keybind configuration file to reset corrupted input mappings, which is the primary fix for the revive/carry action conflict on PC.

SECTION 1: OVERVIEW

The Fortnite revive/carry input conflict is a configuration error where the game's input system incorrectly maps the revive action to the carry teammate command. This error manifests as an inability to perform the revive action, as both the designated revive key and the carry key execute the same pickup behavior. The problem is specific to the PC platform (Windows) and occurs across multiple game client versions, particularly following updates that modify control schemes or introduce new actions. This is a common error with a high severity impact, as it directly prevents a core gameplay mechanic (reviving teammates) during matches. No specific error codes are generated; the failure is purely behavioral within the game's action system.

SECTION 2: SYMPTOMS

The application executes the "Carry Teammate" action when the "Revive" action is initiated. This occurs during gameplay when a player attempts to revive a downed teammate by holding the designated revive key. The system ignores the intended revive command and instead initiates the carry animation, placing the teammate on the player's back. The auto-revive function also fails intermittently under the same conditions, causing the player character to stand idle over the downed teammate. The conflict persists regardless of which specific keyboard keys are assigned to each action in the settings menu.

SECTION 3: COMMON CAUSES

Category: Configuration Error Specific technical explanation: Corruption within the GameUserSettings.ini configuration file, specifically in the ActionMappings or AxisMappings sections. This corruption causes keybind assignments to overlap or reference incorrect internal action names. Why this causes the problem: The game engine reads the corrupted bindings, causing multiple input events to trigger the same hardcoded game action (Carry). Category: Software Conflict Specific technical explanation: Third-party peripheral software (e.g., Logitech G Hub, Razer Synapse, Corsair iCUE) with active macro or profile configurations intercepting and remapping the 'F' and 'E' key signals before they reach the game. Why this causes the problem: The game receives a modified key press signal that does not match its expected input for the revive action. Category: Game Bug Specific technical explanation: A latent bug in the game's input stack where rapid successive binding changes can cause the action priority list to desynchronize. The "Carry" action retains a higher priority state than "Revive" in certain contextual conditions. Why this causes the problem: The action resolver incorrectly selects the higher-priority carry action when both are theoretically valid for a downed teammate. Category: Configuration Error Specific technical explanation: Residual configuration data from a previous Fortnite season or a different game mode (e.g., Save the World) that uses a different action mapping schema persists in the user's profile cloud sync. Why this causes the problem: Conflicting action definitions are merged from the cloud, creating an ambiguous control scheme on the local machine. Category: Software Conflict Specific technical explanation: Operating system-level sticky keys, filter keys, or other accessibility features modifying key press duration and interpretation. Why this causes the problem: The game's input handler misinterprets the modified key event, failing to meet the exact condition required for the revive action.

SECTION 4: SOLUTIONS

Solution 1: Reset Keybind Configuration Files

Difficulty: Easy Time Required: 5 minutes Success Rate: High Prerequisites: Fortnite must be fully closed. Steps:

Completely exit the Fortnite client and the Epic Games Launcher. Verify closure via the Task Manager (Ctrl+Shift+Esc), ending any processes named FortniteClient-Win64-Shipping.exe or EpicGamesLauncher.exe.
Navigate to the Fortnite configuration directory: C:\Users\[YourUsername]\AppData\Local\FortniteGame\Saved\Config\WindowsClient.
Locate the file GameUserSettings.ini. Rename this file to GameUserSettings.ini.backup.
Locate the file Input.ini (if present). Rename this file to Input.ini.backup.
Restart the Epic Games Launcher and launch Fortnite. The game will generate fresh, default configuration files upon launch.
Navigate to the in-game Settings > Keyboard & Mouse menu to reconfigure your custom keybinds (Revive to F, Carry to E). Apply the settings.

Technical Explanation: This procedure forces the game engine to rebuild its input mapping tables from default values, eliminating any corruption, overlap, or incorrect action names in the user's local configuration. Verification: Join a team-based game mode (e.g., Duos, Squads) in a non-competitive match. When a teammate is downed, approach them and hold the newly configured 'F' key. The correct revive progress circle should appear, and the carry action should not initiate.

Solution 2: Disable Conflicting Peripheral Software

Difficulty: Medium Time Required: 10 minutes Success Rate: Medium Prerequisites: None. Steps:

Identify any running peripheral management software. Common examples include Logitech G Hub, Razer Synapse, Corsair iCUE, or SteelSeries Engine.
Open the Windows System Tray (click the ^ icon on the taskbar) and right-click the icon for any such software. Select Exit or Quit to fully close the application.
Press Ctrl+Shift+Esc to open Task Manager. Navigate to the Processes tab and end any remaining processes related to the peripheral software (e.g., lghub.exe, Razer Synapse Service).
Launch Fortnite without this software running. Test the revive functionality.
If the revive works, reopen your peripheral software and examine its profile or macro settings for Fortnite. Delete any macros or key remaps associated with the 'E' or 'F' keys. Ensure the profile is set to use default Windows key signals.

Technical Explanation: This removes a layer of software that can intercept, reinterpret, and send altered HID (Human Interface Device) signals to the game, ensuring Fortnite receives the raw, intended key presses. Verification: With the peripheral software closed, the revive action executes correctly. After reconfiguring the peripheral software profiles, the correct behavior persists when the software is running.

Solution 3: Verify and Repair Game Files

Difficulty: Easy Time Required: 15 minutes Success Rate: Medium Prerequisites: Active internet connection for file validation. Steps:

Open the Epic Games Launcher.
Click on your Library.
Locate Fortnite and click the three dots (...) under the game tile.
Select Manage.
Click the Verify button. This initiates a process where the launcher compares all local game files against the official Epic Games server versions.
Allow the process to complete. It will download and replace any missing or corrupted files, which may include core input definition files.
Launch the game after verification completes.

Technical Explanation: The verify function repairs corrupted or outdated game pak files that may contain the core definitions for game actions (like "Revive" and "Carry"), ensuring the local client matches the server's expected state. Verification: The Epic Games Launcher will display a "Verification complete" message. Successful repair is indicated by the revive function operating as intended post-launch.

Solution 4: Create a Clean Local User Profile

Difficulty: Advanced Time Required: 10 minutes Success Rate: High Prerequisites: Fortnite must be fully closed. Knowledge of your Epic account credentials is required. Steps:

Fully close Fortnite and the Epic Games Launcher as described in Solution 1.
Navigate to C:\Users\[YourUsername]\AppData\Local\FortniteGame\Saved.
Rename the entire Saved folder to Saved_Old.
Launch the Epic Games Launcher and start Fortnite. The game will create a new, clean Saved folder with default settings.
Log into your Epic account when prompted. Your online profile and purchases are stored server-side and will resync.
Reconfigure all in-game settings, including your keybinds. Test the revive function.

Technical Explanation: This method eliminates all local cached data, including corrupted cloud-synced settings and persistent player input state, providing a completely fresh environment for the game to populate from the account server. Verification: A new Saved folder is created upon launch. The revive action functions with default binds. After re-applying custom keybinds, the correct contextual behavior between Revive and Carry remains stable.

Solution 5: Disable Windows Accessibility Features

Difficulty: Easy Time Required: 3 minutes Success Rate: Low Prerequisites: None. Steps:

Press the Windows key, type "Ease of Access keyboard settings", and press Enter.
In the settings window, ensure the following toggles are set to Off:

* Sticky Keys * Filter Keys * Toggle Keys

Scroll down and click on Other settings. Ensure Print Screen shortcut is also off.
Close the settings window.
Restart your computer to ensure any background services related to these features are terminated.
Launch Fortnite and test.

Technical Explanation: These features can alter the scan code timing and repetition behavior of keystrokes. Disabling them ensures the game receives standard, unmodified keyboard input events with expected timing. Verification: The features show as disabled in Windows Settings. The revive key press is registered by the game as a standard hold action without interference.

SECTION 5: PREVENTION

Regularly verify game file integrity through the Epic Games Launcher after major game updates. Avoid making rapid, successive changes to keybind configurations in the settings menu; apply changes deliberately and test after each modification. Maintain peripheral driver and software updates, but audit macro profiles post-update to ensure they do not inject unintended commands. Periodically archive and replace the GameUserSettings.ini file (as per Solution 1) as a routine maintenance step if custom bindings are frequently changed. Monitor game patch notes for fixes related to input or interaction systems.

SECTION 6: WHEN TO CONTACT SUPPORT

Contact Epic Games Player Support if all documented solutions fail and the error persists across a completely fresh Windows user profile. Prior to contact, gather the following diagnostic information: the FortniteGame.log file from C:\Users\[YourUsername]\AppData\Local\FortniteGame\Saved\Logs, and a detailed system specification report. Provide a clear description of the testing performed. Official support channels are accessible via the Epic Games Help section at epicgames.com/help.